Your name

Your email

Confirm Email (required):

Your Phone Number

PROJECT/WORK: New BuildRefitServiceParts

VESSEL INFORMATION

Vessel Make and Model (required)

Length Overall (LOA) (required)

FeetMeter

Vessel Width/Beam (recommended)

Maximum propeller diameter that will fit (required)
Dimension from center line of shaft to hull. Minimum of 10% tip clearance to the bottom of the vessel is required.

Maximum shaft outer diameter (OD) possible (required)
Shaft must increase diameter by at least 30% to accomodate PP rod.

ENGINE INFORMATION

Number of Engines (required)

Engine Manufacturer (required)

Model Number (required)

Engine hp/kW (required)

hpkW

Max Rated RPM (required)

Existing Gearbox Type (recommended)

hydraulicmechanicalsail drive

Forward Gear Ratio (required)

Shaft Length (required)

FOR NEW BUILDS AND REFITS

What type of Hundested system are you interested in?

Pitch Control UnitsCP GearboxesThrustersCP Propellers

FOR PARTS OR SERVICE ON A HUNDESTED SYSTEM

Please provide the Manufacturing Number, a 4 digit number found in the manual and stamped on a plate on the pitch control unit and stamped on the hub.

Manufacturing Number (required)

Additional Notes:

Yes, add me to the AB Marine newsletter list