Spare Seal and Spare Seal Case
A spare seal case and 1 premium Nitrile seal is included with the EliteSeal. A total of 2 spare seals can fit inside the seal case. The innovative split face plate design allows you to install a new seal without removing it from the shaft – lowering your overall maintenance.

Integrated Bearing Design
The EliteSeal integrated water lubricated bearing will allow the seal body to self-align following the shaft insuring proper face seal alignment. ALL Lasdrop bearing housings have tolerances within 0.001 of an inch.

EliteSeal Lip Seal
The EliteSeal Lip Seal is a ring-shaped elastomeric seal with a lip that seals the mating surface around a rotating shaft, which prevents pressurized liquid around the shaft from leaking. EliteSeal includes spares attached by incorporating a housing and quick changing split face plate. The EliteSeal design is proven, tested, and reliably dry. Appropriate for most marine applications, EliteSeal offers very high initial or retrofit quality and longevity.

Sizes and Specifications

EliteSeal Sizes
Lasdrop EliteSeal sizes range from 3/4″ up to 8″ (20mm to 200mm). EliteSeal shaft seals can be fully customized based on your specifications. Please see the standard sizing below and contact AB-Marine if you have any questions or need any assistance in sizing the correct shaft seal for your job.
EliteSeal Imperial Sizing
* Minimum clearance between stern tube and coupling.If seal body is close to the stern tube, you must ensure shaft is center to it.
EliteSeal Metric Sizing
* Minimum clearance between stern tube and coupling.If seal body is close to the stern tube, you must ensure shaft is center to it.
EliteSeal Purchase Specifications
To purchase the EliteSeal Lip Seal, here is a complete and comprehensive lineup of models for both Imperial and Metric sizes.

EliteSeal Imperial Model and Specs
EliteSeal Metric Model and Specs
Would you like to discuss Lasdrop EliteSeal Lip Seals without obligation?
If you are interested in our products, we would like to send you further information.
Please fill out the form below and we will contact you immediately. Or feel free to call us at 401-847-7960