Call Us 401-847-7960 | sales@ab-marine.com

AutoProp

Autoprop Self-pitching Feathering Propeller

Automatic Self Pitching

Autoprop self pitching feathering propeller enables less RPM to be used to produce comparable or better thrust and boat speed, and faster boat speed with less RPM.  Autoprop allows increased range under power … up to 30% fuel savings and a quieter engine at lower RPM with less vibration and wear.  You will experience enhanced performance in rough seas as the engine does not overload with more thrust to punch through the waves.

Same Blade Shape in Reverse

The Autoprop feathering blades swing thru 180 degrees into reverse which presents the same propeller shape and leading edge as in forward.  This produces more predictable handling and stopping power is dramatically improved.  In almost every case the Autoprop eliminates prop walk in reverse and cavitation is eliminated.

Low Drag

The Autoprop blades align themselves to the water flow when under sail. This reduces sailing drag by up to 85% compared to a 3-bladed fixed propeller of same diameter and blade area.  Feathering to the water flow rather than the shaft angle reduces drag still further on steeply angled shaft installation.

Reduce Sailing Drag Up to 85%

30% Fuel Savings

Benefits of Autoprop Propellers

  • The only fully automatic self-pitching propeller available.
  • The Autoprop had a maximum efficiency of 70% … Higher than all other props tested – Fixed, Folding or Feathering.
  • Blades are true profiles (aerofoil), not flat (planar) blades like all other feathering propellers. Therefore greater thrust is developed in both forward and reverse at all engine rpms.
  • In reverse, a true blade profile is in effect. No cavitation, greater stopping power and control, improved handling, almost no prop walk.
See the Autoprop underwater

Unique Autoprop Features

Sailing

Sailing Mode

The feathered image above shows how, when sailing, Autoprop reduces drag by up to 85% compared with a three blade fixed propeller.  With the two blade propeller the reduction can be even greater. This drag reduction can equate to as much as one additional knot in sailing speed.

Ahead

Ahead Mode

Autoprop automatically varies its pitch depending on the conditions. As the wind or sea conditions vary, so does the blade pitch. The result is maximum efficiency whatever the conditions, with increased speeds at lower engine RPMs and lower fuel consumption and emissions.

Astern

Astern Mode

In reverse the Autoprop blades swing through 180 degrees and present exactly the same blade shape as they do ahead. The result is the same excellent thrust with greater stopping power and less prop walk.

Autoprop_PP_rotateNEWSHADOW_2blade

Autoprop 2-Blade

For engines rated to 40hp

Autoprop_PP_rotateNEWSHADOW_3blade

Autoprop 3-Blade

For engines rated to 350hp

Quality Construction

All propellers sold by AB Marine are manufactured from NIBRAL, a metal alloy made of nickel, aluminum and bronze. NIBRAL is far stronger in all specification areas than manganese bronze (commonly used by other prop manufacturers).

+45%

Tensile Strength

+27%

Impact Strength

+50%

Fatigue Strength

+50%

0.2% Proof Strength

+85%

Cavitation Erosion Resistance

+85%

Corrosion Resistance

Testimonials

Would you like to discuss Autoprop propellers without obligation?

If you are interested in our Autoprop products, we would like to send you further information.
Please fill out the form below and we will contact you immediately. Or feel free to call us at 401-847-7960

    Your Name (required):

    Your Email (required):

    Confirm Email (required):

    Your Telephone (required):

    Model of Interest: 2-Blade3-BladeAll Models

    ENGINE INFORMATION

    Number of Engines (required)

    Engine Manufacturer (recommended)

    Model Number (recommended)

    Engine hp/kW (required)

    Max Rated RPM (required)

    Type of Gearbox (recommended)

    hydraulicmechanicalsail drive

    Forward Gear Ratio (required)

    Prop Installation Type:

    1. P Bracket Strut2. Shaft Log3. Aperture


    Existing Prop Size:

    Shaft Diameter:     Prop Diameter:     Pitch:    

    # of Blades:   Right HandLeft Hand

    Additional Notes: